Solution Concentration Calculator

Find the mass fraction, molarity, molality or normality of a solution, work out dilution and mixing, and convert percentages to mol/L. Enter the known quantities — the calculator finds the rest and shows the solution step by step.

Enter data

Education
What to find
Settings
Decimal places
Atomic masses and constants
School set: atomic masses rounded to whole numbers (Cl = 35.5), Vₘ = 22.4 L/mol, Nₐ = 6.02·10²³. Standard: IUPAC values, Vₘ = 22.414 L/mol.

Result

CalcCore
Enter the known quantities — the result will appear here.

What the solution calculator does

Six tabs cover typical solution chemistry problems. “Mass fraction” links the mass of the solute, solvent, solution and the fraction. “Molarity” finds c, n, V or the mass; the molar mass can be entered as a formula. “Dilution” and “Mixing” solve preparation problems, “ω ↔ mol/L” converts percentages to moles per litre, and the last tab computes molality and normality.

Mass fraction of the solute

The mass fraction is ω = m₁ / m, where m₁ is the mass of the solute and m = m₁ + m₂ is the mass of the solution. For 20 g of salt and 180 g of water the solution weighs 200 g and ω = 20 / 200 = 0.1, that is 10 %. Conversely, to prepare 200 g of a 5 % solution you need m₁ = 0.05 · 200 = 10 g of the substance and 190 g of water. If the solution is measured in millilitres, find the mass through the density: m = ρ · V.

Molar concentration

The molar concentration c = n / V shows how many moles of a substance are in a litre of solution. The amount of substance is n = m / M. For 5.844 g of NaCl (M = 58.44 g/mol) in 0.5 L of solution: n = 5.844 / 58.44 = 0.1 mol, c = 0.1 / 0.5 = 0.2 mol/L. You can choose units such as mmol/L or mol/m³, and give the volume in millilitres.

Diluting solutions

On dilution the amount of solute does not change, so c₁ · V₁ = c₂ · V₂. To make 500 mL of a 10 % solution from a 36 % one you need V₁ = 10 · 500 / 36 ≈ 138.9 mL of concentrate and 361.1 mL of water. The law works for any concentration — %, mol/L — as long as c₁ and c₂ use the same units.

Mixing solutions and the cross rule

The amount of solute in a mixture is the sum of the amounts in the two solutions: ω = (ω₁m₁ + ω₂m₂) / (m₁ + m₂). For 100 g of a 10 % and 300 g of a 30 % solution: (10 + 90) / 400 = 25 %. The fraction of the mixture always lies between ω₁ and ω₂. The cross rule answers the reverse question — in what ratio to mix two solutions to get the required fraction: m₁ : m₂ = (ω₂ − ω) : (ω − ω₁) in absolute value.

Converting ω to molarity

To go from a mass fraction to a molar concentration you need the density of the solution: c = 1000 · ω · ρ / M (ρ in g/mL). Concentrated sulfuric acid, 98 % with a density of 1.84 g/mL, has c = 1000 · 0.98 · 1.84 / 98.072 ≈ 18.39 mol/L. Take the density from a reference table — it depends on the concentration and the temperature.

Molality and normality

Molality b = n / m(solvent) is measured in moles per kilogram of solvent: 0.5 mol in 2 kg of water gives 0.25 mol/kg. Unlike molarity it does not depend on temperature. Normality Cₙ = c · z, where z is the number of equivalents: for 1 mol/L of H₂SO₄ in complete neutralisation Cₙ = 2 eq/L.

All numbers are exact: fractions are not rounded (for example 5/36 L), decimals are rounded to the chosen number of places. Atomic masses for formulas come from the settings.

FAQ

How do I find the mass fraction of a solution?

ω = m(solute) / m(solution). For 20 g of salt in 200 g of solution ω = 0.1, or 10 %.

How do I prepare a solution with a given mass fraction?

Find the solute mass as m₁ = ω · m and the water as m₂ = m − m₁. For 200 g of a 5 % solution that is 10 g of the substance and 190 g of water.

How do I find the molar concentration?

c = n / V, where n = m / M. For 5.844 g of NaCl in 0.5 L: c = 0.2 mol/L.

What is the difference between molarity and molality?

Molarity is moles per litre of solution, molality is moles per kilogram of solvent. Molality does not depend on temperature.

How do I calculate a dilution?

By the law c₁V₁ = c₂V₂. The volume of water is V₂ − V₁.

Can I dilute using percentages?

Yes, c₁V₁ = c₂V₂ works for mass fraction too if the volumes refer to solutions of roughly equal density; for exact work switch to masses.

What is the cross rule?

A way to find the mass ratio of two solutions that gives the required fraction: the masses are in the ratio of the differences between the mixture fraction and the fractions of the solutions.

How do I convert percent to moles per litre?

c = 1000 · ω · ρ / M, where ρ is the density of the solution in g/mL.

What is normality?

The number of mole-equivalents in a litre of solution: Cₙ = c · z.

Can I enter the molar mass as a formula?

Yes, in the “M” field you can type a formula (NaCl, H2SO4) and the calculator works out the molar mass itself.

How do I prepare a 0.1 M NaCl solution?

You need 0.1 mol per litre: dissolve 0.1 · 58.44 = 5.844 g of NaCl in water and bring the volume of the solution to 1 L. This very example is in the “Molarity” tab.

Can I mix solutions of different substances?

The “Mixing” tab computes a mixture of two solutions of the same substance. For different substances find the concentration of each separately from the total volume or mass of the mixture.